Chinese
Home Page About ZPLAST Products ZPLAST News Catalogue Download Contact us    
PET Preform Production Line
PET Preform Injection Molding Machine
PET Preform Mould
Automatic PET Blow Molding Machine
6-12cav Servo Motor Blow Molding Machine
2cav 4cav Blow Molding Machine
Economical Blow Molding Machine
Jar Blow Molding Machine
Preform Hand Feeding Blowing Machine
5L 10L 20L Bottle Blowing Machine
Semi-Automatic PET Blow Molding Machine
2Cav Blow Molding Machine
4Cav Blow Molding Machine
10L 20L 5Gallon Blow Molding Machine
PMMA PC Lamp Blow Molding Machine
PE PP PC Blow Molding Machine
Blow Molding Machine With Moving Mode
Blow Molding Machine With Accumulator Die Head Mode
Shangair Brand Air Compressor
HDPE PP Cap Production Line
Cap Injection Mould
Hydraulic Cap Compression Molding Machine
None Gas Contained Drink Filling Line
3in1Unit Water Filling Machine
2in1 Unit Oil Liquor Filling Machine
5Gallon Barreled Water Filling Machine
Split type water filling Machine
R.O Water Treatment Plant
Carbonated Drink Filling Line
3in1Unit Carbonated Drink Filling Machine
Beverage Mixer With Water Chilling Uni
CIP Washing System
Juice Tea Hot Filling Line
3in1Unit Juice Hot Filling Machine
Juice Sterilizing System
Bottle Cooling(Warming)Machine
Piston Type Filing Machine
Bottle Unscrambler
Labelling Machine
Stick Labelling Machine
Shrink Labelling Machine
Shrink Film Packing Machine
Laserjet Printer Inkjet Printer
Products
> Prodcts

 Fully automatic Bottle Unscrambler
 
Product parameters

Fully automatic Bottle Unscrambler
FEATURES
RP series rotary unscrambler is special designed as complete set for rinser/filler/capper mono block and with the latest international technology. it is based on the introduction of foreign advanced technology as the foundation to the development of high-speed direction, according to Chinas beverage filling equipment
The needs of development, the development of a row of bottles for the leading domestic level equipment. The bottles are transferred through neck guided air conveyor to the monobloc after unscrambling from the unscrambler with fast, high efficiency and sanitation, It is satisfied for high speed filling request, and also raise production efficiency of the whole line. The air conveyor can also be used for aseptic filling line after take some modification.
This series machine is suitable for unscrambling disordered polyester bottles. The disordered bottles are carried into the storing section of the machine, and with the help of the pushing force of the rotating disk, the bottles enter their position. Then the turning-bottle device and the air-flow make the bottle-mouth upward, at last bottles are discharged to the next process by air-transferring conveying system. The machine adopts PLC system, and its frequency-control system can adjust its production capacity easily. And also the device to get rid of distorted bottles is installed.
Main Characteristics
 Main motor reducer with torque limiting mechanism to prevent damage to the machine failure.
 Three elected row of bottles institutions, so that each has three off the bottle, improve the efficiency of the bottle off the bottle station.
 hanging the bottle conveying duct, to avoid bottle tip over during transport.
 has a broken bottle reject mechanism.
 a card bottle detector, automatic shutdown and alarm card bottle.
 has no bottle detector is used to issue a signal to the elevator, the elevator will automatically add the bottle.
 Bottle conveying air duct equipped with a photoelectric switch, for control Unscrambler the start and stop.
 Unscramble with injection nozzle can be easily filling oil to the gears, bearings and cam.
 has a maintenance door and molds to replace the door.
 main electrical components (inverter, PLC, photoelectric switches, relays) are used MITSUBISHI, OMRON,
SIEMENS and other components. gas system are imported products.

Technical Specification

Model RP-12 RP-18 RP-21
Work position 12 18 21
Production capacity(500ml) (BPH) 6000-8000 12000-16000 15000-18000
Gas source pressure(MPa) 0.7 0.7 0.7
Gas consuming volume(m3/min) 0.5 0.9 1.5
Suitable bottle type(mm) 350-1500ml 350-1500ml 350-1500ml
φ50-φ90 φ50-φ90 φ50-φ90
Main motor power(Kw) 2.5 3.5 4.5
Dimension(mm) φ2056×1970 φ2650×3370 φ3050×3570
Weight(Kg) 3500 4200 5200

About ZPLAST | Products | News | Contact us  
Copyright 2016 (c) ZPLAST MACHINERY MOULD LTD All rights reserved.